Blox Xperience Music Bouch.or. Jaune Fluo 1 Paire

• Ear protectors are composed of two elements; The acoustic filter and the end cap universal reusable (Image A). Ear protectors are provided with the acoustic filter installed in the end cap (8-12mm). Insert the eartip into your ear canal by following the following instructions. It is important that the cap fulfils well tightly to your ear to get the mitigation certified. If you are unable to insert properly and comfortably these plugs in your ears, get in touch with the manufacturer.
• Insertion of hearing protection in your ears

Before inserting the earmold into your ear, it is important that your hands are clean to reduce the risk of infection. Take the other end, with the thumb and index finger hearing protection (Image B). To facilitate insertion, slightly pull the tip of your ear up and out. This is most easily done by holding your ear with your second hand, your arm from behind your head (Image C). Push in and turn slightly in the ear hearing protection until the time that it is comfortably and securely positioned in the ear canal.

• Extraction hearing protection to your ears

Remove the hearing protection while turning it gently in order to remove the feeling tight with the ear canal. This movement helps to avoid any inconvenience when removing the protection. After cleaning, put the hearing protection in its case, clean it also.

• To remove the acoustic filter

Slide out by gently pressing the tip below the acoustic filter until it so (Image D).

• To place the acoustic filter in the nozzle

Make sure that the logo is positioned to the outside of the cap so that it is visible once the filter is installed.

Insert the acoustic filter in the opening the wider the tip, pushing first one of the edges of the acoustic filter in the nozzle.

Then, push the acoustic filter to the inside of the spout by pressing the logo (Image E). To obtain the mitigation certified, filters should be properly installed and positioned.

• Cleaning of hearing protection

Clean the nozzle after each use allows you to remove the earwax and other impurities. The nozzles can be wiped with a damp cloth or a cleaning wipe antibacterial. Once the acoustic filter removed, the tips can be cleaned with soap or lozenges hygienic specially provided for this purpose. Rinse with clear water and let dry naturally. Only if necessary, the acoustic filter can be cleaned with soap or lozenges hygienic specially provided for this purpose. After cleaning, rinse the filter with clear water. Then let dry naturally.

• Storage

Hearing protection should always be stored in a clean place and sec. Use the box provided to that effect. Clean if necessary. Do not store any other object in this case.

• Warnings

To preserve your hearing, you must protect yourself 100% of the time noise exposure with protections appropriate to the situation.

Hearing protection must be used in compliance with the instructions contained in this user guide. A regular cleaning and careful use will enable you to use in the best conditions and for as long as possible.

Before inserting hearing protection in your ear, first make sure the acoustic filter is positioned correctly on the mouthpiece.

To get the best performance of hearing protection, the nozzle must fill and seal the ear canal.

The ear protectors can be damaged by contact with sharp objects.

Regularly check that there are neither cracks nor tears on the tips. Cracks and tears may reduce the hearing protection offered by these products. Replace if necessary.

Hearing protection may deteriorate in contact with chemicals or containing alcohol.

Do not leave the hearing protection at the reach of children.

• Insert the eartip into your ear canal by following the following instructions. It is important that the cap fulfils well tightly to your ear to get the mitigation certified. If you are unable to insert properly and comfortably these plugs in your ears, get in touch with the manufacturer.

• Warnings

To preserve your hearing, you must protect yourself 100% of the time noise exposure with protections appropriate to the situation.

Hearing protection must be used in compliance with the instructions contained in this user guide. A regular cleaning and careful use will enable you to use in the best conditions and for as long as possible.

Before inserting hearing protection in your ear, first make sure the acoustic filter is positioned correctly on the mouthpiece.

To get the best performance of hearing protection, the nozzle must fill and seal the ear canal.

The ear protectors can be damaged by contact with sharp objects.

Regularly check that there are neither cracks nor tears on the tips. Cracks and tears may reduce the hearing protection offered by these products. Replace if necessary.

Hearing protection may deteriorate in contact with chemicals or containing alcohol.

• Insertion of hearing protection in your ears

Before inserting the earmold into your ear, it is important that your hands are clean to reduce the risk of infection. Take the other end, with the thumb and index finger hearing protection (Image B). To facilitate insertion, slightly pull the tip of your ear up and out. This is most easily done by holding your ear with your second hand, your arm from behind your head (Image C). Push in and turn slightly in the ear hearing protection until the time that it is comfortably and securely positioned in the ear canal.

Extraction hearing protection to your ears

Remove the hearing protection while turning it gently in order to remove the feeling tight with the ear canal. This movement helps to avoid any inconvenience when removing the protection. After cleaning, put the hearing protection in its case, clean it also.

To remove the acoustic filter

Slide out by gently pressing the tip below the acoustic filter until it so (Image D).

To place the acoustic filter in the nozzle

Make sure that the logo is positioned to the outside of the cap so that it is visible once the filter is installed.

Insert the acoustic filter in the opening the wider the tip, pushing first one of the edges of the acoustic filter in the nozzle.

Then, push the acoustic filter to the inside of the spout by pressing the logo (Image E). To obtain the mitigation certified, filters should be properly installed and positioned.

Cleaning of hearing protection

Clean the nozzle after each use allows you to remove the earwax and other impurities. The nozzles can be wiped with a damp cloth or a cleaning wipe antibacterial. Once the acoustic filter removed, the tips can be cleaned with soap or lozenges hygienic specially provided for this purpose. Rinse with clear water and let dry naturally. Only if necessary, the acoustic filter can be cleaned with soap or lozenges hygienic specially provided for this purpose. After cleaning, rinse the filter with clear water. Then let dry naturally.

Storage

Hearing protection should always be stored in a clean place and sec. Use the box provided to that effect. Clean if necessary. Do not store any other object in this case.

• 1 pair
• Silicone thermoformed
• Reusable
• Washable
• -19dB

• Do not store any other object in this case.
• Do not leave the hearing protection at the reach of children.

• Ear protectors are composed of two elements; The acoustic filter and the end cap universal reusable (Image A). Ear protectors are provided with the acoustic filter installed in the end cap (8-12mm).
• Silicone
• Hypoallergenic